Visual Comfort

This single-feed surface transformer converts standard 120 line-voltage to 12 volts to provide the necessary voltage for powering a Kable Lite low-...

This single-feed surface transformer converts standard 120 volt line-voltage to 12 volts to provide the necessary voltage for powering a Kable Lite...

Turnbuckles tighten and secure the cables and provide the necessary tension for a clean look.

Suspension cable virtually disappears for a clean and elegant look. Provides support for runs over 20 feet.

For short, straight runs (runs under 20').

Hardware used to mount turnbuckles and anchors to a brick or cement surface.

Turnbuckles tighten and secure the cables and provide the necessary tension for a clean look.

Clear plastic tubing insulates bare cable from another cable or metal.

This single-feed remodel recessed transformer converts standard 120 line-voltage to 12 volts to provide the necessary voltage for powering a MonoRa...

Isolating connectors join sections of rail and isolate power feeds from each other.

MonoRail pre-bent into a horizontal S curve.

The Lil Wok Shade by VC Modern provides a pleasant visual enhancement to several of our task heads. Available in modern finishes. Installation is s...

This outside rigger attaches to the wall to secure cables 12" from the wall at 2" cable separation.

Center Power Feeds are generally used to bring power to a Kable Lite system when the transformer or canopy cannot be located directly above the run.

Center Power Feeds are generally used to bring power to a Kable Lite system when the transformer or canopy cannot be located directly above the run.

A single-feed canopy is mounted to a wall or ceiling adjacent to the Kable Lite run.

Includes 45' of bare cable (enough for a twenty foot wall-to-wall run), two pairs of slimline turnbuckles, a power feed canopy and a 12 volt 300 wa...

For cable separations of 8" or less.

Snaps on front of MR16 lamp to hold a single lens or louver.

Hexcell louver cuts glare from lamp.